Hinsitsu Auto Parts Sdn Bhd
10, Jalan Selat Selatan 4,
Landpac Industrial Park,
Pandamaran,
42000 Port Klang,
Selangor, Malaysia.
10, Jalan Selat Selatan 4,
Landpac Industrial Park,
Pandamaran,
42000 Port Klang,
Selangor, Malaysia.
+603-3165 2090
+603-3165 1090
+60162052150
High Pressure Fuel Filters Water Separator
Previous | 4 / 4 | Next |
110A Series
Diesel/Gasoline High Pressure Cartridge Fuel Filter/Water Separator
The 110A fuel filter/water separator may be installed on the vacuum or pressure side of a fuel pump (up to 100 psi /6.9 bar) with a maximum flow rate of 15 gph (57 lph) for diesel fuel and 35 gph (132 lpm) for gasoline. The compact size and four port versatility make the 110A a popular fuel filter/ water separator for small engine applications. The filter features 1/4˝- 18 NPTF (SAE J467) inlet and outlet fuel ports and a unitized mounting bracket. Its two piece, powder-coated die-cast aluminum construction ensures a long-lasting, durable particulate and water removing filter. Servicing is also made easier by the spin-on bowl assembly and simple cartridge filter changeout procedure.
The 110A Series is a two piece all aluminum design with a cartridge type filter element. Servicing is accomplished by spinning off the bottom bowl from the mounting head. Collected water is drained from a ½”-20 UNF bolt. Inlet and outlet ports are available on either side of the unit. Fuel enters the inlet and travels inside-out through the cartridge filter assembly. Any collected water falls down through the center of the element while fuel exits through the filter to the outlet.
Product Features:
• 100 psi /6.9 bar operating pressure or can be used on vacuum side of pumps.
• 4 port (1/4˝- 18 NPTF (SAE J467)), die-cast aluminum unitized head
• Mounting holds spaced at 1.4" (35.6 mm), for 1/4" bolt
• 2 piece powder-coated aluminum construction
• Filters gasoline, diesel, and gasoline/oil blended fuels
• Flow rates up to 35 gph (132 lph) with gasoline applications
• Flow rates up 15 gph (57 lph) for diesel fuel application
• Certifications: ABYC, NMMA type accepted, UL listed
• Compact design
• Heavy duty construction
• Easy to service
Diesel/Gasoline High Pressure Cartridge Fuel Filter/Water Separator
The 110A fuel filter/water separator may be installed on the vacuum or pressure side of a fuel pump (up to 100 psi /6.9 bar) with a maximum flow rate of 15 gph (57 lph) for diesel fuel and 35 gph (132 lpm) for gasoline. The compact size and four port versatility make the 110A a popular fuel filter/ water separator for small engine applications. The filter features 1/4˝- 18 NPTF (SAE J467) inlet and outlet fuel ports and a unitized mounting bracket. Its two piece, powder-coated die-cast aluminum construction ensures a long-lasting, durable particulate and water removing filter. Servicing is also made easier by the spin-on bowl assembly and simple cartridge filter changeout procedure.
The 110A Series is a two piece all aluminum design with a cartridge type filter element. Servicing is accomplished by spinning off the bottom bowl from the mounting head. Collected water is drained from a ½”-20 UNF bolt. Inlet and outlet ports are available on either side of the unit. Fuel enters the inlet and travels inside-out through the cartridge filter assembly. Any collected water falls down through the center of the element while fuel exits through the filter to the outlet.
Product Features:
• 100 psi /6.9 bar operating pressure or can be used on vacuum side of pumps.
• 4 port (1/4˝- 18 NPTF (SAE J467)), die-cast aluminum unitized head
• Mounting holds spaced at 1.4" (35.6 mm), for 1/4" bolt
• 2 piece powder-coated aluminum construction
• Filters gasoline, diesel, and gasoline/oil blended fuels
• Flow rates up to 35 gph (132 lph) with gasoline applications
• Flow rates up 15 gph (57 lph) for diesel fuel application
• Certifications: ABYC, NMMA type accepted, UL listed
• Compact design
• Heavy duty construction
• Easy to service
Performance Characteristics | |
---|---|
Series Type | Cartridge FF/WS |
Brand | Racor |
Series | 100 |
Mounting Holes | 1.4" (35.6 mm) spaced, for 1/4" bolt |
Flow Rate (gph) | 15 gph in diesel, 35 gph in gasoline |
Flow Rate (lph) | 57 lph in diesel, 132 lph in gasoline |
Micron Rating | 10 |
Port Size | 1/4"-18 NPTF (SAE J476) |
Number of Ports | 4 |
Media | Aquabloc® |
Replacement Element |
R11S = 2 micron R11T = 10 micron |
Material | Powder Coated Die-cast aluminum |
Width (inch) | 3.2 |
Width (cm) | 8.1 |
Height (inch) | 6 |
Height (cm) | 15.2 |
Depth (inch) | 3.2 |
Depth (cm) | 8.1 |
Weight (lb) | 1.3 |
Weight (kg) | 0.59 |
Element Removal Clearance | Below 2.1 inch (5.1 cm) |
Working Pressure Maximum (psi) | 100 |
Working Pressure Maximum (bar) | 6.9 |
Clean Pressure Drop (psi) | 0.15 |
Clean Pressure Drop (kPa) | 1.03 |
Maximum Air Inlet Temperature (F) | -40 to +250 |
Maximum Ambient Temperature (C) | -40 to +121 |
Options | Water in Fuel Detection available separately |